Setup MHC_Data Wi-Fi Access - Aruba Onboard Make sure the Aruba Onboard app is installed on your laptop or mobile device that you are registering prior to continuing. If you don't see it on your laptop, please contact Tom to have it pushed out to you. After confirming that the app is on the device, go to the following onboard URL to have the wireless network set up. You can do this at any time, even prior to the network being available in your location: https://naw2.cloudguest.central.arubanetworks.com/portal/scope.cust-c2b529d9a0ff4fe3ac24c87082cb04a4/cda-user-portal/passpoint Select "Yes, I already have Aruba Onboard" to run the WLAN setup, which will issue the user a client certificate and configure their user profile for the WLAN You will then may be asked to authenticate to the site. Please use your work e-mail address to authenticate with as you do with every other application. You should then be prompted to install the certificate using the Aruba Onboard app: Once install finishes, you need to set up the network profile: Once this completes, you are done and should see: Choose MHC_Data and it will automatically connect in the background using the certificate you applied during the previous steps.
